That is fantastic - so much better than the clunky parts in the app
One thing though - it would be great if you could put all the parts in a zip file…
Cheers
Jeremy
↧
Breadboard Top View Part Collection | #4
↧
Breadboard Top View Part Collection | #4
Thanks…
Yes, zip/batch file would be great… I updated with batch file, that can be imported by Fritzing…
↧
↧
LM2596 step down module
Hi , can you help me with LM317 step down module ? I need quickly this part for a schematic. Thank you !
↧
Schematic view - un-used pin
I have a part that doesn’t use one of the pins. How can I assign a pin in the schematic view to un-assigned?
↧
Schematic view - un-used pin
I’ve resolved my problem. I spotted a way to delete the un-used pin in the schematic view.
↧
↧
2, 3 & 4 digit 7-segment displays
I’ve finished the 2-digit, 3-digit, and 4-digit 7-Segment LEDs. Here they are.
7-Segment-Display-2-Red.fzpz (10.9 KB) 7-Segment-Display-3-Red.fzpz (12.1 KB) 7-Segment-Display-4-Red.fzpz (13.1 KB)
↧
LM2596 step down module
If you only want the SCH - It’s too hard to draw a module BB view and PCB view -, but you have to provide links to it so I can copy it.
↧
LM2596 step down module
What kind of links ? Some images with the module or the electrical diagram of module ?
↧
LM2596 step down module
↧
↧
LM2596 step down module
Download the part at the top and look at the SCH view - this is the kind-of thing a FZ SCH module is -. Is the LM317 the same, because then I just have to change the LM2596 text to LM317.
↧
Limit Switch part
Are you still looking for this part?
I’ve made a quick, basic breadboard view for the part.
The part wouldn’t be hard to create, but I need some details to do that. Do you have a datasheet for this part? What are the pin-outs for the connector?
I can finish this part if you still need it and can provide some info about it… just let me know…
Randy
↧
Limit Switch part
Do you need the Switch part or the Module?
↧
Limit Switch part
Hi!
Thanks for the answer. Unfortunately i couldnt find any datasheet of the part, but i believe this board is very simple and from the pictures (from the link I sent above) we can see that it has a resistor as a pull-up, a small capacitor probably for voltage atenuation, plus an LED + resistor…Thats basically it.
Pins are 5V, 0V and Signal.
Let me know if this is enough…again thanks very much for the help !!
↧
↧
Limit Switch part
im looking for the module.
↧
Limit Switch part
Give a Picture captured by you, the site image has some multiple/mirror images…
And give the board size, Screw Hole Spacing etc…
so @just_randy can complete the part…
↧
Grid visibility
Browsing this forum about this topic I only saw something about the grid visibility some years ago : 2016. But could not use that.
Is there a way to enhance the grid visibility or change its colour? I am facing problems with this, hardly can notice the grid. Or did I overlook another, more recent (than 2016)thread about this?
Thanks.
↧
Limit Switch part
Measuring mine while still on the Ender3, it’s a 20x20mm PCB with holes at 15mm spacing, ie 2.5 mm in from the bottom and sides. Holes I’m guessing are 3.5mm, or at least something bigger than the M3 screws it has.
↧
↧
Grid visibility
All I can see in View is that you can change the background colour. If you have snap on you don’t really need to see the grid because it will pull to the nearest junction.
↧
Part breadboard with gradient
Hi, I wanted to know if it is possible to create a part with a gradient… I made a part in inkscape and applied gradient to make it look prettier, but when adding it to fritzing that layer does not look … it appears blank or empty.
It is a detail, I can make the part in only one color, but I want to know if it can.
Thanks
↧
Part breadboard with gradient
I don’t know - vector drawing is all XML code so maybe coding each pixel might be too much -, but maybe opera_night might because he knows a lot about drawing.
If you want to upload the part fzpz with the 7th button above I can take a look at it, ie, it might be a format problem.
↧