Transformer VB 1,5A 9V
Sorry, I uploaded the file I used for my home made PCB. I'll upload the regular one.
View ArticleThe size of the LEDs do not correspond to reality
Is this in PCB view? In FZ if you put a line of LEDs in a row on a 0.100" (2.54mm) spacing they will overlap, which shouldn't be a problem because you ignore it and just file the flange down in real...
View ArticleSchematic to breadboard layout
Thanks for the updated version, I had a go at moving the switches and tried to follow your instructions and I struggled. I got a few in place then it all went bad, I ended up giving up. I have a...
View ArticleSchematic to breadboard layout
I forgot to mention I'm thinking of adding a adafruit LED ring too. Not sure if I'll be able to, but I do need something similar for on the left of the loop pedal it lights up 3 different colours and...
View ArticleThe size of the LEDs do not correspond to reality
Thanks for the answers. Again I ask your help. I created the custom LED 3mm and 5mm, and can not see the edges. Can you tell me why? I attach the files....
View ArticleThe size of the LEDs do not correspond to reality
You have to select all in the svg editor, and resize page to selection. Basically it looks like the page is smaller than the image.
View ArticleThe size of the LEDs do not correspond to reality
I tried to increase the area of the page but the result does not change.
View ArticleThe size of the LEDs do not correspond to reality
I updated the link above. Thanks for the support.
View ArticleThe size of the LEDs do not correspond to reality
You just have to raise the circle path6329 to the top. You should also rename layer1 to silkscreen, just for convention.
View ArticleClik here to view.
Schematic to breadboard layout
jovid196168: I wasn't sure if I was alright to just add them downwards from the original LED. I need to yet program these but need the correct positions first Yes how you did it is correct, the one...
View ArticleClik here to view.
Schematic to breadboard layout
I still need to add the things that were on the left of the original drawing like the screen, power plug and monitor power. But I need to add two screens somehow. I'm thinking of using something like...
View ArticleSchematic to breadboard layout
The neopixel will be bright, but is also timing sensitive (although adafruit has a library for it) and power hungry (with bad peak currents sometimes). Depending how much brightness you want/need a...
View ArticleTo Old_Grey Ground fill
Hi, been at this for days. Can’t get it to work. Is this a bug? But in your response to the Jan 14 question, you answered one of my questions, “Click on one pin, and if both are connected they should...
View ArticleTo Old_Grey Ground fill
I'm not really a high end user, nor have much elec experience, but I have a sketch done by someone else with ground fill, and if I click on one GND pin, all GND pins turn yellow. In this sketch they...
View ArticleTo Old_Grey Ground fill
555 TIMER PCB.fzz (13.6 KB)Thanks for the quick reply attached is the circuit. It would save a lot of traces and time if I could get ground fill to work. Your help is appreciated,Les
View ArticleTo Old_Grey Ground fill
looks like the ground-fill is working alright to me.... It looks like this circuit is not done, you have an RGB LED with only the green anode hooked up. But I'm sure you knew that. 555 TIMER PCB.fzz...
View ArticlePay to get fritzing parts added?
vanep - The two-legged button part works great, but a few cosmetic issues: 1) The preview image in the parts bucket still has the four legs2) The legs are actually kind of hard to see on the board....
View ArticleA ceramic disk capacitor with rubber band legs?
Several capacitors have rubber band legs, and there is even a blue squarish capacitor with rubber-band legs. But, as far as I could tell, there were no of the typical circular ceramic disk capacitors...
View Article