Clik here to view.
Red dot contacts in PCB view
Those little red dots drove me crazy for a long time... two identical circle... one had the red dot and one didn't. They looked identical in the graphics editor. but in the .svg, the one with the red...
View ArticleClik here to view.
Can you make me parts from these illustrations?
Here is your parts... Let me know how they work. Solar Charg Controller_img1.jpg4002x2409 517 KB Solar Charge Control.fzpz (31.1 KB)Solar Panel.fzpz (5.5 KB)
View ArticleClik here to view.
First part for review
So, I have finally managed to get a very simple part created and apparently (as far as I can see anyway) working the way I want it. If the more experienced parts creators (which will be almost anyone...
View ArticleRed dot contacts in PCB view
For some reason the copied contact circles became ellipses in the XML, and now I know what to look out for. Yeah I installed Droid but FZ still kicked up a fuss. I don't really use fonts much, if at...
View ArticleFirst part for review
I didn't actually check the dimensions to the datasheet, but wow. I wish my first part was that good because I can't see anything out of place when I use the part. In Edit the fonts look funny - even...
View ArticleFirst part for review
Hi Peter, Couldn't find a datasheet... looks good, but Old Gray is right, you need to clean up your Metadata, there is still stuff left in there from the FZ Core chip generator. I would renumber the...
View ArticleResizing Stripboard - cropping from left?
Is there a way to crop/resize a stripboard board, but cropping from the left? I probably made a rookie mistake and laid my parts out on the far right of the board.
View ArticleResizing Stripboard - cropping from left?
Maybe rotate it 180º, crop, and rotate back. I'll give it a play. EDITYeah it works.
View ArticleBarn-door Astrotracker
Closer but still a few problems (I just discovered I could download the schematic and blow it up in Infanview which makes looking at it easier!): the push buttons and LCD look fine, but the motor...
View ArticleClik here to view.
Clik here to view.
First part for review
Yes the data sheet has gone missing its original use was in coax cable Ethernet adapters so it is more than 30 years old (and probably obsolete for 25 years or so) but B+G seems to have a ton of them...
View ArticleClik here to view.
Resizing Stripboard - cropping from left?
Old_Grey: Maybe rotate it 180º, crop, and rotate back. I'll give it a play. EDITYeah it works. Never would have thought of that! I thought it was going to work, but when I resize the board it...
View ArticleResizing Stripboard - cropping from left?
Holly crap your right. There is a big bug there because jumpers go crazy even if you don't rotate it. I have noticed that FZ doesn't like board changes after the original selection. EDITParts are fine...
View ArticleIncorperating Github Fritzing Parts into Fritzing
After downloading and saving the Fritzing Parts from Github to my computer, how can I incorperate them into the Fritzing program?
View ArticleIncorperating Github Fritzing Parts into Fritzing
If they are a .fzpz part you right-click in My Parts and import.
View ArticleIncorperating Github Fritzing Parts into Fritzing
There are many parts and the parts are all fzb
View ArticleIncorperating Github Fritzing Parts into Fritzing
I remember importing a library a long time ago but can't remember how. Maybehttps://learn.adafruit.com/using-the-adafruit-library-with-fritzing/import-the-library-into-fritzing
View ArticleFirst part for review
Thinking about your comment I realize that I made a mistake in deleting the unused socket pins as that precludes using a socket (since they don't make 24 pin sockets with only 4 pins like they do for...
View ArticleSearch function in the parts view does not work
In my new installed Windows 10 the search function works.It looks like the failure is in my Windows 7 Installation.
View ArticleFirst part for review
I suppose you could cut the pins off the socket that you're not using or direct soldering to the PCB. Anything in copper is a hole, and if it's a just a non connected contact just do it in the usual...
View Article