Repetitive downloads don't work on Win10
Hello Peter On my notebook (win10-64 bit) everything worked out fine. Gave it enough time and it was OK. Even "new database" was downloaded and installed. My desktop pc (win10-32bit) finally loaded...
View ArticleAPA-102-2020 - the ultimate smd addressable led
I've tried my version of footprint with apa102 - 2020, and hot air gun reworksome of them worked, convinced that footprint and schematics were rightand some of them failed, likely due to poor...
View ArticleClik here to view.
Repetitive downloads don't work on Win10
This is a new failure again , it is trying to make a network connection to github to get the updates, so checking that networking is OK would be a good bet, trying to access githun.com via the web...
View ArticleClik here to view.
Roland TR-808 Bass Drum Breadboard Project
Unfortunatly you look to have hit the fritzing bug and corrupted the parts database for this sketch. That is likely because of the connections made in pcb view and/or some wiring errors in breadboard...
View ArticleClik here to view.
APA-102-2020 - the ultimate smd addressable led
It will be worthwhile to post your foot print when you feel it is correct so it is available to anyone that wants to use these even if the original poster doesn't want them any more. The more parts we...
View ArticleScale box on toolbar
I'm doing PCBs with over 100 components and I'm always changing the scale for different situations. If you go through View/Set Grid Size/change #/OK it's minimum of 4 clicks, where as if it was a box...
View ArticleRepetitive downloads don't work on Win10
Good morning PeterI opened Github in my browser and opened a few pages - no problem.I opened Fritzing and clicked manual update:- message: checking for updates;- message: .. parts lib update...
View ArticleGlobal track thickness setting
When making tracks on a SMD PCBs you always have to shrink every track individually, because the std 24mil is way too thick for such fine parts. I also find the std track thickness of 24mil hard to...
View ArticleRepetitive downloads don't work on Win10
I don't know the solution but as a work around you could copy your Fritzing user directory from your 64bit install to your 32bit machine.
View ArticleGlobal track thickness setting
I second this request. I rarely use over 16 mil and most of my traces are 8mil and would love if I could set the default width. Maybe even save the default width with each project.
View ArticleCan't start fritzing on XP, Exception Processing Message C0000013 Parameters...
Steps I took that resulted in the problem: Tried to start on any local disks What I expected should have happened instead: ... My version of Fritzing and my operating system: fritzing.0.9.3b.32.pc,...
View ArticleMake image on mask PDF
i have make a image on the pcb board layout how can it's be on at the PDF export (mask) it can be print out at any other but mask
View ArticleClik here to view.
APA-102-2020 - the ultimate smd addressable led
nice to hear that 2020footprintforshare.fzz (28.1 KB) the board inside is the footprint i tested and worked,both the 5050 / 2020 were tested, with an Aduino as controller. the pins (data/...
View ArticleDo I need ground fill and if so how do I do it?
I have routed everything and it's kind of ready, this includes traces for ground as I figured I had to do this. Now I'm trying to simplify and get a ground fill so there are fewer traces and vias.....
View ArticleMake image on mask PDF
By the sounds of it you are trying to make an exposed copper image. To do that you have to make a custom part which is not easy.
View ArticleDo I need ground fill and if so how do I do it?
Any islands that are overlapping the ground traces will be connected but show as not connected. You said Copper fill and I just want to confirm you actually clicked ground fill not copper fill as...
View ArticleDo I need ground fill and if so how do I do it?
I used the function under the following menu path :Routing > Ground Fill > Copper Fill (top) It's just not doing it for me. Should I have not routed traces to the ground connections of my parts?
View ArticleRoland TR-808 Bass Drum Breadboard Project
Thank you Peter. I started to modify the original using the IC you provided. I didn't start from a blank breadboard, I copy and pasted the schematic so as to preserve the design. I deleted the...
View ArticleDo I need ground fill and if so how do I do it?
You do want the ground traces as without them Fritzing will complain and also there is a chance of something not being connected. The issue seams to be with clicking copper fill not ground fill. It...
View ArticleClik here to view.
Do I need ground fill and if so how do I do it?
Hmmmm. I have been wondering if my version is up to date. because it still says beta.... Screen Shot 2017-06-08 at 17.35.15.png502x564 38.5 KB Screen Shot 2017-06-08 at 17.34.50.png663x508 147 KB
View Article