Do I need ground fill and if so how do I do it?
Yes the program is still in Beta. You will see in the second picture it says Copper Fill (top) and right below it it says Ground Fill (top).
View ArticleDo I need ground fill and if so how do I do it?
No worries. I have clicked the wrong one more times than I would like to admit. I also have some boards that take 10-15 minutes to generate fill so when you click the wrong one it is an agonizing wait...
View ArticleCan't start fritzing on XP, Exception Processing Message C0000013 Parameters...
I think (from other people posting here, I don't have XP up anymore) that the latest version of Fritzing 0.9.3 doesn't work on XP. As I recall (a search for XP in the search bar in the forum may find...
View ArticleClik here to view.
Repetitive downloads don't work on Win10
I just fired up my very old and slooow EEEpc laptop which runs Win7 32 bit and after a very long time it successfully did the parts update so it doesn't look like there is a problem on 32 bit (I...
View ArticleMake image on mask PDF
If you upload the sketch file (the .fzz file) using the upload button (7th from the left on the reply tool bar) we can have a look at what you are trying to do and perhaps tell you whats wrong. Peter
View ArticleClik here to view.
Roland TR-808 Bass Drum Breadboard Project
j303: How did you create this file you uploaded? Did you use the existing components or did you have to recreate the schematic from a blank project in order for the file not to be corrupted? I indeed...
View ArticleAPA-102-2020 - the ultimate smd addressable led
Are the 5050 leds and the 2020 the same foot print? From the original poster I thought the 2020 was much smaller, but the data sheets of the two seem to be the same except the 2020s seem to have...
View ArticleObter os Componentes
Como obter os componentes: Goouuu Mini-S1 ESP8266 Nodemcu Wifi e Sensor de corrente não invasivo 100A SCT-013.
View ArticleObter os Componentes
There doesn't seem to be a part for either of these. The Wimos mini in core parts is close (but two less pins and a different pin out) to the Goouuu Mini-S1. As to the current sensor this project used...
View ArticleObter os Componentes
If you don't need an exact layout I can fairly easily modify the Wimos mini to add the 2 missing pins and change the pin labels as it already seems to be pretty close to the board you have. There...
View ArticleObter os Componentes
Se você puder modificar eu agradeço.Eu também não encontrei o desenho dele.Obrigado
View ArticleCan't start fritzing on XP, Exception Processing Message C0000013 Parameters...
Thanks, i'll try it. Now after restarting window with "Fritzing" blinks, and all finished without any error messages. I'll finding the solution of this problem, because my computer for electronic...
View ArticleAPA-102-2020 - the ultimate smd addressable led
(post withdrawn by author, will be automatically deleted in 24 hours unless flagged)
View ArticleRoland TR-808 Bass Drum Breadboard Project
I had a play, and it's screwed. It seams like a lot of work redoing the whole thing, but it's only the first one that takes a lot of time. Copying is very quick when you have both open at the same...
View ArticleObter os Componentes
Try this part out for the mini. I think it is at least close to correct in outline (and hopefully pin spacing) although it won't be exact in outline I expect since there isn't enough data available....
View ArticleObter os Componentes
Some dimensions here https://www.alibaba.com/product-detail/Goouuu-MINI-S1-NodeMcu-ESP8266-Wifi_60610267458.html
View ArticleClik here to view.
Roland TR-808 Bass Drum Breadboard Project
I finally downloaded the file, you created and had a look. Thank you for clarifying what the power hookups are supposed to look like and the difference between the +12V, GND and -12V. I relabeled the...
View Article