How to create Circular Pads?
Yeah square ones will do just fine. I wanted to use the circular ones because of tight space.
View ArticleWhere to hire someone who can make a full service
It is still not clear what you want to build, but looking at the parts, it seems a bit complicated since you do not want to use premade modules. Your 2x25watt stereo amp is complicated and has a lot...
View ArticleHow to create Circular Pads?
Just use a via and delete the hole in Gerbv from the Gerber drill file as well as deleting the extra copper from the opposite side. You will also need to delete them in the mask layers. Or use the...
View ArticleClik here to view.
Problem in creating 3.5mm audio jack (SMD)
I was earlier trying to create this 3.5mm audio jack SMD by editing a preexisting part in fritzing. Here is the datasheet HTB1Eyr3KFXXXXX5XFXXq6xXFXXXD.jpg700x360 34.3 KB . Now I am stuck on how to...
View ArticleHow to invert a PCB icon
You select ‘both layers’ so you can see both sides clearly, and in ‘both layers’ top traces are yellow and bottom are orange. Then you pull parts onto the top with it set on ‘view from above’ so they...
View ArticleHow to create Circular Pads?
What do you mean by “add a test point”. Is that a small square pad.
View ArticleHow to create Circular Pads?
Yes it is a designated sparkfun part named test pad. It comes in 2 sizes. It is very small like1 1x1 mm or so.
View ArticleHow to create Circular Pads?
If you search in Fritzing you will find a part called “Test point” made by sparkfun and it has a couple of variants with different fixed sizes. You could also use the part called “pad” that I only...
View ArticleClik here to view.
How to create Circular Pads?
Well, ConMan was looking for a ‘Round’ pad. As Sublimeartistry pointed out, a Via works. I use the part called Pad for my pads - they are shapable size from square to rectangle.
View ArticleHow to invert a PCB icon
That is what I’ve done in the picture I sent but I want the NE555 to be mirror imaged since I want pin 1 to be at the bottom not on top.
View Article12V Lead Battery
Sorry for the late reply, I saw this but was busy with other things. While there isn’t yet a 12 V battery, I think that the lipo-2000ma part from sparkfun in core parts will serve your purpose. If you...
View ArticleProblem in creating 3.5mm audio jack (SMD)
If you upload the fzpz file of your part here (upload is 7th button from the left in the reply tool bar) we can help you out. That said, its fairly easy, in Inkscape in the copper1 group create a...
View ArticleClik here to view.
How to invert a PCB icon
Does this do what you are looking for? pcb_invert.png900x666 16.1 KB I think you are asking to mount the 555 on the bottom of the board which requires the pads to be inverted. If the pads want to be...
View ArticleClik here to view.
TEA5767 SMD Module
Hello! Welcome to Fritzing! Now to the point, the module is perfect on all views, all connector have names (which is great!) and everything fit on the 0.1" fritzing grid. But it’s an IC (more pin...
View ArticleTEA5767 SMD Module
he was actually trying for this module from a previous thread: https://alexnld.com/product/tea5767-fm-stereo-radio-module-76-108mhz-for-arduino-with-antenna/ which would be fairly easy to make as it...
View ArticleRequest - TEA5767
Not hard to accomplish. This part can be done in 2 days approximately since it’s pretty small and there is a good top view picture on the link provided. I couldn’t find the part diagram in order to...
View ArticleClik here to view.
TEA5767 SMD Module
I found the frizting part on github but clearly, it isn’t similar enought to the image I posted. If you unzip the .fzz file and export the part in fritzing, you will see what I mean. Arduino Module
View ArticleTEA5767 SMD Module
Assuming this is the one with the polumo motor driver as breadboard (I’m too lazy to download it and look), yes I saw and ignored that. If you google for tea5767 you will find a fritzing image with a...
View ArticleClik here to view.
Standardization of Fritzing part design
Fritzing Standards for good design Hello Fritzing community, I have been using the Fritzing on past university project (very few) and forgot about this software for some months, but now, while doing...
View Article