Running a single-board-computer
I'm pretty new to Linux & qt in general. What I have is the SDK with the necessary toolchains and there's also a pre-compiled Linux kernel image; rootfs & Uboot, included in the SDK when...
View ArticleClik here to view.
Windows 7 install failure
@DonpK Thank you! In fact I had the same problem but couldn't find the solution. Thanks for the tip, worked for me
View ArticleClik here to view.
Reading 2 voltages simultaneously with Arduino
That's good because I still haven't found my mega but that said I'm somewhat confused. Are they reading a differential voltage (i.e. 2 pins reading the opposite ends of a resistor to measure the...
View ArticleClik here to view.
Hackaday Fritzing Beat Down
I think his $100 is pretty safe note the terms "to make and document a DIP ‘tiny85 part from scratch " I take that to mean not starting from another Fritzing part. It is still doable by someone with...
View ArticleClik here to view.
ARM Version for Raspi or Pine64
On a pi (which runs linux already) you shouldn't need a cross compiler. Downloading the Linux sources and building on the target machine should work (you would need to install all the dependencies...
View ArticleValor PM6078-004 5 Volt to 9 Volt DC-DC converter
PM6078-004 5 Volt to 9 Volt DC-DC converter by Valor Obsolete for many years, but available surplus cheap ($.30 US at present) from http://www.bgmicro.com/pm6078-004.aspx Views created: breadboard /...
View ArticleReading 2 voltages simultaneously with Arduino
That;'s what I thought The sensors are a temp dependant resistor - pot for sim - to ground between a voltage divider, with the Inlet Air temp is on A0 and the coolant temp is on A1. And it you don't...
View ArticleReading 2 voltages simultaneously with Arduino
Ah, now it makes sense. Yes with CMOS inputs if you leave them floating they can do odd things (such as drift to the value of the pin next door) so its not a matter of a differential input but rather...
View ArticleReading 2 voltages simultaneously with Arduino
I could only read one at a time so I only used 1 pot. My bad.
View ArticleRunning a single-board-computer
hello dear Anyasz many many thanks for sharing your ideas.
View ArticleClik here to view.
Diode ( keine Led ) Bauform 0805 gesucht?
Hey Leute Ich bin neu was Fritzing angeht. Mein Problem ich suche aktuell eine Diode ( IN4001) in der SMD 0805 Bauform für mein Platinenlayout. Aber wenn ich in der Suche bei Fritzing nachsehe finde...
View ArticleClik here to view.
Hackaday Fritzing Beat Down
It is not difficult to make a FZ part form scratch... It is though quicker to use other FZ files as templates. i.e. To make a 30-pin part, I will start of with a 30-pin connector, the .fzp and .svg's...
View ArticleARM Version for Raspi or Pine64
I want to say I believe there is a package in the repos. But is it an older version, 0.9.0? Not sure, but I think there is one in there.
View ArticleHackaday Fritzing Beat Down
Yeah, it's a total moot-point because no one makes a part from scratch because it too slow. Why don't those guys put a breadboard view in their EDA, hell KiCad can't even link views in real time, and...
View ArticleIs Fritzing SMD ready
Someone was asking for a Diode IN4001 SMD 0805, and there isn't any. Is there enough SMD parts to take FZ to the next level.
View ArticleHackaday Fritzing Beat Down
If I had time I would take him up on this, not for the money but just to show it is not impossible or even that difficult (Maybe over the holidays). Though I think Fritzing is in a slump now and has...
View ArticleHackaday Fritzing Beat Down
FZ isn't in a slump because when I joined 1 year 1 month ago there was maybe 3 people on the forum a week, now it's 5 a day. No one is getting paid making FZ, so it will come at a slow pace. GIMP took...
View ArticleHackaday Fritzing Beat Down
https://github.com/fritzing/fritzing-app/graphs/contributors nuff said!
View Article