Problems with lines in schematic view
Ahh, now I see it. Yes the lines aren't straight, they are on a slight diagonal. It's even worse in PNG. I checked the part and the leg spacing is exactly 0.100", so it must be that the grid in FZ is...
View ArticleClik here to view.
Dark circuit - Dunkelschaltung
With the note I haven't tested this, this should work. The position of the ldr changed because there is a logical inversion caused when the second transistor is added. When its dark the ldr will be...
View ArticleClik here to view.
Problems with lines in schematic view
I think this is not so much a bug as a feature of sorts. I think the base problem is that at least Inkscape (because thats all I've used) doesn't snap the objects in a group to the grid. It does...
View ArticleProblems with lines in schematic view
0.004" is a lot - I was a machinist -, but that's probably just some parts because I checked this one and it's correct to the thou/mil vertically. It looks more like the grid is out. EDITI changed the...
View ArticleProblems with lines in schematic view
Looking at his parts was going to be my next move after finishing correcting my parts. However the rectifier diode in core is one foot print that is out by a bit. connector0pin cx 42 cy...
View ArticleProblems with lines in schematic view
That unfortunately isn't the only one, because to me it feels like 40% of them have something wrong. I was thinking that someone should go through all the parts and standardise them, but that could...
View ArticleProblems with lines in schematic view
The problem doesn't just affect the parts connections though, it creeps in to bend to bend lines too. The parts here are code generated - we could get at least those right. For the rest, I would be...
View ArticleGit parts pull requests not being approved
I have two long-standing pull requests (#56 and #60) outstanding that have not been approved since the final revisions went in on 19th July. I had received some feedback from el-j and others, improved...
View ArticleProblems with lines in schematic view
Holy Megalodon Batman. I was thinking maybe add a small svg program to FZ, like all you really need is square and circles and slight variations of those, but I read further and it seam you want...
View ArticleGit parts pull requests not being approved
I think things just happen slowly. I made a part 12 months ago that appeared in v0.9.3, but in the meantime I revised it 6 months ago and it still hasn't been updated.
View ArticleProblems with lines in schematic view
I was just trying to submit a simple two line fix for a bug. The help on launchpad tells you how to fork the source on lp, push the changes and then you are told you must either grant inkscape rights...
View ArticleGit parts pull requests not being approved
Plenty of other parts have been approved (including some of mine I think), it's just these two that are stuck and nobody is telling me why. One of them is really useful to everyone (those quad logic...
View ArticleClik here to view.
Problems with lines in schematic view
I like your idea of using Inkscape as the engine, I hadn't even thought of whether it had an api that would let me get at things. I have a perl script (mostly because I learned perl in 1991 before...
View ArticleDark circuit - Dunkelschaltung
Thank you verry much! In simulation I already get much more current to my LEDs than in my original circuit. Tomorrow I will build it in real and see what will happen! yoursMartin
View ArticleHelp for 16 pins terminal creation
Hi there , Thank for your complete answer, I didn't understand everything but it seems that you think I do not have the correct sizes for holes pads. But I do have the right sizes. The problem was...
View ArticleHelp for 16 pins terminal creation
I'm back , I managed to make the pcb view and I want to add this on fritzing , I'm editing the component , choosing a view and assign pins to my pcb, but I got a problem on Inkscape I put two layers...
View ArticleHelp for 16 pins terminal creation
One layer needs to be embedded inside the other; copper0 inside copper1 or vice verse... <g id="copper1" transform="translate(57.778 51.111)"> <g id="copper0" stroke="#ffbf00" fill="none">...
View ArticleHelp for 16 pins terminal creation
wow, thanks but how can I put this into inkscape ? =)
View ArticleHelp for 16 pins terminal creation
In the video, the XML Editor. The video is not just for modifying nodes, it tells you the basics.
View ArticleHelp for 16 pins terminal creation
You could just do it in a text or xml editior... In the xml editor in inkscape, drag the one layer inside the other or delete the one layer and create a new one outside the other... In the old version...
View Article