How do i install fritzing on raspberry pi 2
There should be a version in the debian repositories, so it should also be in raspian.But you can also compile it yourself. For this you need the source which you can get from github...
View ArticleCamdenboss CTB0158 5.08mm pitch 90 degree terminals
After 6 months I finally answered the mystery of how terminal connectors and header connectors should look in schematic view when they are fully connected. I have the free version of Eagle installed...
View ArticleCamdenboss CTB0158 5.08mm pitch 90 degree terminals
Sometimes when the connector##terminals are 0,0 they may work but can get lost when importing into a graphics editor. The connector##terminals can be any size and don't even have to be rectangles,...
View ArticleMaking PCB pads connectable?
A small problem for me, but perhaps a big opportunity for Fritzing in the ever-growing SMT/SMD world—connectable PCB pads. I often have SMD parts for which no Fritzing part is currently available, but...
View ArticleMaking PCB pads connectable?
If you are going to fudge parts, just pull a header pin and put a pad on it.
View ArticleClik here to view.
Looking for part: DC power jack
Hi, I am a beginner for fritzing, May I know where can I find the part DC power jack like the picture that I attached? Because I have been look for several website, but I can't find the part.
View ArticleBlank Logo Import
I made a svg and loaded it into a PCB with Silkscreen Image, and it ends up an empty rectangle. Any ideas how to fix it. Change extension from .fzz to .svg to get image.Speeduino logo8sm.fzz (9.5 KB)
View ArticleLooking for part: DC power jack
If you can download the project (.fzz) file, the part might be in the TEMP bin.
View ArticleBlank Logo Import
While I'm not sure what you are trying to do with it, it currently isn't in group silkscreen (but that may be fixed by importing it there) and it has pxes in the font sizes (which Fritzing will tend...
View ArticleLooking for part: DC power jack
Can I have the link to download? or the path? cuz i only can find bin and parts
View ArticleLooking for part: DC power jack
He was suggesting that if you have the .fzz file that produced the picture that you posted, if you load that project in to Fritzing the power plug may show up in the temp parts bin and be exportable...
View ArticleBlank Logo Import
If you go to the bottom of CORE parts/PCB view/Silkscreen Image/Inspector/Load Image, you are supposed to be able to load images into the PCB view. I tried it with a rectangle svg without a silkscreen...
View ArticleClik here to view.
Blank Logo Import
Yep, does the same to me (which is no help ) I guess wait for Steel ...
View ArticleBlank Logo Import
I did it the sucky way, ie Export as PNG, Import back in and Path/Trace Bitmap.
View ArticleClik here to view.
Trouble creating a Jumper wire in PCB view. (0.9.3)
In the PCB view, I would like to create a Jumper, so I can solder external wires and therefore create one sided PCBs that I mill myself. Fritzing's instructions (here) say to "right-click a Rat's nest...
View ArticleTrouble creating a Jumper wire in PCB view. (0.9.3)
Do you mean the actual jumper wire that is in CORE parts bin, or "add bendpoint" and click-ALT and run the trace to a connector.
View ArticleClik here to view.
Trouble creating a Jumper wire in PCB view. (0.9.3)
Thanks for your response Old_Grey. Much appreciated. According to Fritzing's instructions, "Jumpers are connections that need to be soldered with external wires. These are shown as blue connections...
View ArticleClik here to view.
Trouble creating a Jumper wire in PCB view. (0.9.3)
I tried using a Jumper from the Core bin, but Fritzing doesn’t recognize it as legitimately completing my circuit. If that is the best option that’s ok. But if I’m missing something…....
View ArticleClik here to view.
Trouble creating a Jumper wire in PCB view. (0.9.3)
I've never seen that option, maybe it's from an old version You need little traces joining to the jumper, because in real life you don't put a component leg and a trace wire into the same hole....
View ArticleParts folder not found
I am new to Fritzing and to the Mac. I get this message when I start Fritzing on my Mac.Where should the parts folders be?
View Article