Rectifier Diode w greater spacing
Std Zener Diode from CORE bin with greater spacing in PCB view. Generally 0.5W, but 1W is probably a similar size. Fritzing won't let you edit properties of made parts so voltage has been removed....
View ArticleRectifier Diode w greater spacing
Std Schottky Diode from CORE bin with greater spacing in PCB view. Generally 1A. Blank part# box to define part. Schottky Diode 400milSchottky Diode 400mil.fzpz (6.3 KB) Schottky Diode 500milSchottky...
View ArticleAdd enter-able property box for parts in Inspector
Have you tried putting in an initial value? The only obvious difference between non changeable and changeable is that the changeable ones have values already and perhaps that's what it wants ...
View ArticleAdd enter-able property box for parts in Inspector
The properties section in Part Edit/Metadata doesn't seam that good. You can pull a CORE part into a view and change voltage, power, etc - if it has it - in Inspector, but when you save that as a new...
View ArticleHow far away is a portable version?
You are totally missing this guys' point. Portable means the program itself is not installed on a given computer;it is instead run from the USB drive. Scenario:I use several computers at work and need...
View ArticleMaking PCB pads connectable?
I apparently touched more than one nerve and I apologize if my enthusiasm for a simple feature that would greatly increase Fritzing's usefulness has clouded the question, and sent the conversation...
View ArticleMaking PCB pads connectable?
Just going through my KiCad, and it doesn't seam to exist. Net search and it doesn't seam to exist either. Net recommendation is to make a part or use netlist. A bit of a Eagle search, and it doesn't...
View ArticleClik here to view.
Fritzing will not open
There is a bar at the bottom with a copyright message and version number but it doesn't move like a progress bar would. Everything appears to have unzipped successfully. I have downloaded the previous...
View ArticleFritzing will not open
If this is the first start of 9.3 you have to let it download part files for maybe 10 min. There is no progress bar so it looks like it's doing nothing.
View ArticleFritzing will not open
That sounds reasonable but process disappears from Task Manager just after the splash screen disappears.
View ArticleFritzing will not open
I was afraid you were going to say that. Without an error message it's going to be hard to work out. I had a program that did that, and it did start once in maybe 100 starts, but I never got to the...
View ArticleAdd enter-able property box for parts in Inspector
This sux. Yesterday I couldn't change the voltage of a created zener, every time I changed it in FZ Edit the old value would reappear after I pressed enter, but now during a new video tutorial showing...
View ArticleClik here to view.
Fritzing will not open
You certainly have an unusual fault , sounds like you only get the splash screen (which indeed has a copyright and version message in the bar at the bottom) however there should be a small window...
View ArticleFritzing will not open
I have downloaded an older version (0.8.7b) and this one seems to work fine.
View ArticleFritzing will not open
I bet 9.2 will run fine too. 9.3 introduced the the need of api-ms-win-crt-runtime-l1-1-0.dll, and people's anti-virus's stripping files, are the 2 things that has been the cause of failures.
View ArticleFritzing Part Creation Video Tutorial Series
I'm going to do a series of part creation videos. Open to fullscreen and select 1080p HD in the gear symbol, bottom left corner of the Youtube window, for max clarity. Fritzing Part Creation -...
View ArticleClik here to view.
Fritzing will not open
The only further thing that I can suggest is to try putting the path to Fritzing (mine would be C:\fritzing\fritzing.0.9.3b.64.pc yours may be different) at the start of your path environment...
View ArticleClik here to view.
Making PCB pads connectable?
Awesome! We could be one of the first few to make it available. Thanks for your answer. Now, does anyone know how to attach a connector to the pad part so it shows in schematic view?
View ArticleClik here to view.
Making PCB pads connectable?
Sorry it's never going to happen, like in all other EDAs, because it serves no purpose. What you are saying is you want floating pads to represent a part. How are you going to show that it is a part,...
View ArticleHow do I add XS3868 Bluetooth module in Fritzing Library
I'm very new to fritzing and I need help in parts creation. the part that i want to create is Bluetooth Module XS386. Please help me in this.. I'm attaching the EagleCad Schematic for this just for...
View Article