INK (GLCD) Display Part (NOKIA-5110)
Just saw your post after I posted… Yeah, clearer documentation would be helpful and would eliminate back-and-forth exchanges. Thanks for hanging with me on this! Yes, in first group of parts I did use...
View ArticleClik here to view.
INK (GLCD) Display Part (NOKIA-5110)
opera_night: (however, it’s unlikely I’ll change the font size BUT, I will change the text Path’s to Text (paths also make a hassle to edit the text…). Happy to help, lots of folks helped me when I...
View ArticleClik here to view.
In schematic diagram it shows there is some connection need to be routed
braingood: I have done for the BB view, but I don’t quite sure it is right or not. It looks correct ahaha, but could you please check my battery connection and the I am not sure in connecting 5V and...
View ArticleINK (GLCD) Display Part (NOKIA-5110)
I opened your file in BBedit so I could more clearly see what’s going on. Real simple!!! It turns out that the Fritzing documentation I read regarding building a part is so bad and correlates very...
View ArticleClik here to view.
INK (GLCD) Display Part (NOKIA-5110)
opera_night: FYI - Two of your files changed the pads from Circles to Ellipse’s. That happens in Inkscape if just breathing on a Circle. That is likely an artifact of the rescaling (possibly due to...
View ArticleClik here to view.
Df robot ph sensor
That will be somewhat more difficult. There don’t appear to be any specs about size etc. around and it doesn’t have any connections that Fritzing needs (it connects to the interface board which...
View ArticleClik here to view.
INK (GLCD) Display Part (NOKIA-5110)
It’s possible I’m misunderstanding the image below (from https://github.com/fritzing/fritzing-app/wiki/2.1-Part-file-format )
View ArticleDf robot ph sensor
Can be done after checking this link. It has the probe size and also a good png made from some .svg drawning.
View ArticleINK (GLCD) Display Part (NOKIA-5110)
If you are thinking that the “bus0” and “bus1” ids need to exist as groups in the svg, then yes you have misunderstood. They only need to exist (and be unique) in the fzp file and connector0,...
View ArticleINK (GLCD) Display Part (NOKIA-5110)
Yes, it is for the fzp metafile… It’s all clear now. Thanks
View ArticleClik here to view.
DRC Overlapping problems with QFN / SMT
Hi! I have a custom made part for the MPU9250 9-axis motion sensor. It is a 3mm 24-QFN package, so quite small. Additionally I use a Decawave DWM1001, which is - kind of - SMT package. See the...
View ArticleDRC Overlapping problems with QFN / SMT
The DRC error basically tells you a human eye needs to check them because there might be contact. If you can see gaps and the gap is wide enough for min width manufacture - I think it’s 0.006"(0.15mm)...
View ArticleDRC Overlapping problems with QFN / SMT
Hi! Thanks for the hints! It is a double layered PCB with the MPU9250 on top and the DWM1001 on the bottom side. Both are custom made parts by myself. Could it be a faulty SVG?
View ArticleIn schematic diagram it shows there is some connection need to be routed
I was planning to run my device with external 12V dc battery and also I want to make it rechargeable too , so I guess I need to add ac adapter socket and its charger but i can’t find reference on it....
View ArticleCode for sk9822 fast led
SK9822 LED Datasheet:http://www.normandled.com/upload/201605/SK9822%20LED%20Datasheet.pdf APA102 LED Datasheet:http://www.normandled.com/upload/201603/APA102%20LED%20Datasheet.pdf I hope it’s help for...
View ArticleDRC Overlapping problems with QFN / SMT
If the IC foot print is only on one side they should be ok, it’s just that I thought there might be an error in that part where pads were on both sides. The usual procedure is to print it out an check...
View ArticleDRC Overlapping problems with QFN / SMT
I have found that Fritzing does not deal well with individual parts that have tight spacing when checking with the the DRC tool. It almost seems that it ignores the settings and uses the default...
View ArticleClik here to view.
Castellated Hole
Hello all, I wanted to make a PCB to mount on another PCB. For that I wanted to use castellated holes. Is there any way to do this in fritzing ? Thanks This is what I am talking about-
View ArticleClik here to view.
Castellated Hole
I am not aware of anyway you can do this in Fritzing because Fritzing does not allow holes to intersect the edge. The place I have make my boards charges an extra $15 for them so I have never bothered...
View ArticleIn schematic diagram it shows there is some connection need to be routed
Ah, that explains a few things! Indeed you have a number of problems and as it stands you are likely to blow up the Arduino. Your problem with the batteries is a Fritzing quirk, the bendable leads on...
View Article