Categorize the Mine bin?
Create custom bin... drag a part on to one of the views... right click on the part and click "Add To Bin"... Then click the bin you want to add it to.
View ArticleDFRobot's SD Module (DFR0071)
Looks good over all, a couple of minor problems though. The pcb svg needs a copper1 group which contains the existing copper0 group and the pads under it, and in breadboard the breadboard group needs...
View ArticleEmpty etch_silk_top files when exported as svg or pdf
Steps I took that resulted in the problem: What an awesome piece of software. So easy to use. (Even for me) After completing my pcb layout and arranging the silkscreen top layer, I used the "export...
View ArticleClik here to view.
Empty etch_silk_top files when exported as svg or pdf
This is the error I get in Win7 64 16473955_10209950467252074_833605005045466125_n.jpg668x553 18.7 KB There looks like there is a 14pin part missing. It won't export "for production" because it can't...
View ArticleDFRobot's SD Module (DFR0071)
Thank you, vanepp. I did notice the copper1 group was missing. I used a generic ic from the core parts and changed it to 6-pin inline and exported it to get the pcb footprint. The copper layer groups...
View ArticleEmpty etch_silk_top files when exported as svg or pdf
OK, thanks for looking.The part missing is this one. I selected one board at a time for export as image.
View ArticleEmpty etch_silk_top files when exported as svg or pdf
I deleted 1 board and export/for production/pdf in Win and it had the "etch_silk_top" drawing. Looks like it's a Linux thing. Still getting that error with the part in the bin. The weird thing is that...
View ArticleCategorize the Mine bin?
Another thing you can do to add parts to a custom bin... Just drag any part out to the vertical bin menu, that is the column on the left of the parts bin under the magnifying glass. You can drag a...
View ArticleClik here to view.
DFRobot's SD Module (DFR0071)
No problem, I've been at this for about 6 months and am still learning (and bugging the more experienced folks in here for help ). Its in all our interest to encourage anyone willing and able to make...
View ArticleEmpty etch_silk_top files when exported as svg or pdf
Yep, that soughted it.I deleted one board from the sketch and then exported as pdf, all worked fine.It apparently doesn't like 2 boards in the same sketch even though it prompts you to select one of...
View ArticleDFRobot's SD Module (DFR0071)
Thank you, vanepp.Pardon... But I need to re-read your post here a few times to let it all sink in. As far as all the groups (gxxx) are concerned...I realize I was in the development stage of this,...
View ArticleClik here to view.
DFRobot's SD Module (DFR0071)
grpace: They need to be named appropriately. But, that's just me Me too I like to put in meaningful group names, Inkscape likes to sometimes put in nests of group names and then moving them causes it...
View ArticleDFRobot's SD Module (DFR0071)
OHH !!! New version of Inkscape has been released !!Downloaded it, but haven't tried it, yet One of the "features" is changing the pixels-per-inch to more closely match CSS standards.Wonder what new...
View ArticleDFRobot's SD Module (DFR0071)
Yes someone else mentioned that the latest Inkscape is changing from 90 px to the inch to 93to the inch to match the CSS standard. I'd suggest keeping a copy of Inkscape 0.91 in reserve as I expect...
View ArticleDFRobot's SD Module (DFR0071)
I've been running INK 9.2 for a couple of months and haven't noticed anything, except that it's better. It still has some bugs though - the biggest one is you can't have more than 1 window with it's...
View ArticleWrong measures on export Gerber file
Hi FellowesI did a PC draw in your awsome software but when i try to make it on my cnc verify the measures x=3108 and y=1936 mmare not real because my draw has 85x50mm.Can you please help me?ThanksJose
View ArticleWhy are holes from tht resistor so big
In my first project is use the standard tht resistor from the library. The hole(s) is 0.9 mm diameter. After receiving the pcb my resistors really "drowning" in the hole. In a later project i tested...
View ArticleHow to export to a decent XYRS file / bill of materials
Gerber data and bill of materials to centroid file/placement file service offered at http://www.surfacemountprocess.com/centroid-file-generation-service.html
View Article