Devantech SRF02 Ultrasonic Rangefinder Part Available?
Thanks for the response. I don't see the Devantech SRF02 in that library, but I do see the Maxbotix MaxSonar Ultrasonic sensor, which is very similar. Am I missing the SRF02 somewhere? Is it called by...
View ArticleDevantech SRF02 Ultrasonic Rangefinder Part Available?
If the exact one isn't there you probably aren't missing it, what ever was there looked similar to what you want. A quick look at their sensor page indicates no SRF02 and google didn't show one either...
View ArticleClik here to view.
Led Driver Board 350ma pwm - updated with test part V2
OK, tried to fix the the things below vanepp: Breadboard: the svg lacks a group named breadboard (as specified in the fpz file), the only thing I know this breaks is exporting the image as an svg in...
View ArticleClik here to view.
Led Driver Board 350ma pwm - updated with test part V3
Almost there two last problems only one of which I know how to fix: your silkscreen doesn't display (fixable) and your holes are now too small (don't know how to fix that in Illustrator) so I copied a...
View ArticleTo Old_Grey Ground fill and seeds, SOLVED!
That's why I wanted to look at the .fzz, because the views aren't totally independent. If you want the PCB right, you need the SCH to be totally finished.
View ArticleTo Old_Grey Ground fill and seeds, SOLVED!
Thanks Peter and many thanks O/G for the info that made me persist.made my first PCB with seeds and ground fill, a thing of beauty!BTW, FYI the previous off-white boards from Fritzing were elegant!...
View ArticleLed Driver Board 350ma pwm - updated with test part V3
First, thanks for all your help. Silkscreen is now visible. The holes took a little bit of trial and error, but the values are now: ; NON-PLATED HOLES START AT T1; THROUGH (PLATED) HOLES START AT...
View ArticleClik here to view.
Parts Editor loosing embedded Breadboard image from SVG
I'm finding that the Parts Editor looses images embedded within the SVG. Google failed me on this occasion My new part is a DC-DC Boost Buck Adjustable Step Up Step Down Automatic Converter XL6009...
View ArticleStepdown 5V to 3.3V module
I have changed the breadboard connection now to the edge. I did not use the part in breadboard view myself. Only PCB and schematic.Step Down 5V to 3.3V.fzpz (7.2 KB)
View ArticleESP8266-05 with external antenna
ESP8266-05 WIFI module comes with a DIY terminal strip to solder. In breadboard view, I have not added pins, but only terminals, as the pins are pointing downwards and are not visible, when the module...
View Article4 x 5V to 3.3V logic level converter
This logic level converter comes with 2 x 6 pin DIY terminal strips to solder. The are pointing downwards and invisible when used on a breadboard. So I have made the part with terminals only. I can...
View ArticleParts Editor loosing embedded Breadboard image from SVG
Did you import the pic into Inkscape, trace it to bitmap, delete the original, and save as a plain svg.
View ArticleIs it possobile to make a part that can have daughter boards attached
I have an Arduino Shield that can hold small sensor modules on it. Is there a way to make a the board have sockets like the breadboard that I can attach separate modules to? Or should I just build the...
View ArticleRF Module 433 MHz
there are a number available. Type 433 mhz in the forum search box (the magnifying glass at the top right of the screen). There is at least one in the Sparkfun section of core parts that is incorrect...
View ArticleClik here to view.
Led Driver Board 350ma pwm - updated with test part V3
Blomquist: First, thanks for all your help. No problem, the more people we have making parts the better for all of us. Hopefully if people see there is help available more of them will at least try to...
View ArticleStepdown 5V to 3.3V module
Looks fine now. It is desirable to do all three views properly even if you aren't using them, as someone else that needs the part may need breadboard too (I for instance rarely use pcb because I'm...
View ArticleESP8266-05 with external antenna
A couple of suggestions: in breadboard you want to change the connectorxpin labels on connector 0 to 3 to the larger circle (which currently have the pin names) because if you connect a wire on...
View Article4 x 5V to 3.3V logic level converter
This one looks pretty good, but could use pin labels in schematic so we know what the various connections do. Peter
View Article