74HC4051 8 x Multiplex/Demultiplex DIP
Looks fine, although there already is one available in core (although it is on a breakout board). Peter
View ArticleClik here to view.
Is it possobile to make a part that can have daughter boards attached
While I'm not entirely clear on what you want to achieve, this experiment which creates a coax power plug that "connects" to a socket in breadboard (by dragging one over the other) may do what you...
View ArticleClik here to view.
Parts Editor loosing embedded Breadboard image from SVG
Thanks Old_Grey, that works much better I found this link based on the Trace To Bitmap hint:https://inkscape.org/en/doc/tracing/tutorial-tracing.html ..To use the tracer, load or import an image,...
View ArticleParts Editor loosing embedded Breadboard image from SVG
Another option to consider (and what I usually do) is find something similar (in this case the rio rand lm2596 in core parts may be a good start) and then use copy and paste in Inkscape (or the...
View ArticleClik here to view.
Parts Editor loosing embedded Breadboard image from SVG
Hi vanepp, I searched for lm2596 in core parts, but it didn't return anything... Meanwhile I have something half decent after going for black-on-white labels using 14 point font : I'm going to do a...
View ArticleClik here to view.
Parts Editor loosing embedded Breadboard image from SVG
Hmm, then you may want to try help->check for updates to see if you get a parts database update. It is supposed to be automatic at each start but I have had cases where a update was available but...
View ArticleClik here to view.
Parts Editor loosing embedded Breadboard image from SVG
Thanks Peter, After an update I have the RioRand lm2596 , and lots of others
View ArticleImport alternative stepper motor in my fritzing sketch
I have a question, which is on the usage of Fritzing. I'm trying to sketch up a robot I have made. I want make a proper sketch, which I can send to a manufacture. I found a stepper motor used in this...
View ArticleSchematic to breadboard layout
Hello been awhile since I have posted on here. I have been tinkering away. I have managed to build my pedal on breadboard haven't added any screens. But it all works. How do I go about putting this...
View ArticleESP8266-05 with external antenna
I hope, that I have understood you correct. I have removed the inner circle and made the connection to the outer circle now.ESP8266-05.fzpz (7.5 KB) I had made the connection in schematic view correct...
View Article4 x 5V to 3.3V logic level converter
I have them on the newest version. If you se my comments about variant numbers for ESP8266-05, you have the explantion for it. I must be more careful about noticing variant numbers :o)Logic Level...
View Article74HC4051 8 x Multiplex/Demultiplex DIP
I did find the breakout board in core. But I mostly use Fitzing for PCB layout. Not for breadboard. The breakout board version in core does not make correct pin holes on the PCB.
View ArticleClik here to view.
Cant get my parts to load properly after creating custom images
Hi all, I am trying to make 2 custom parts, a Relay and a PSU I have a BB image, a Schematic and a PCB, they all load into parts editor, but when i save the part and try and load it, i just get a big...
View ArticleCant get my parts to load properly after creating custom images
I can't do much without the .fzz or .fzpz files, but by the sounds of it there is a big red box over the part. This tells you the pins haven't been assigned.
View ArticleCant get my parts to load properly after creating custom images
how do i get those files? I can provide them if needed, im not assigning pins as im a graphic designer not the technical guy, i just need the part imagery working or to test if its correct, i have...
View ArticleImport alternative stepper motor in my fritzing sketch
It appears the stepper motor in your web reference is obsolete and there doesn't seem to be a Fritzing part for it. That said there are generic (i.e. not this exact stepper, but one similar) available...
View ArticleIs it possobile to make a part that can have daughter boards attached
I just realized I did a general reply, so you won't have been notified there is an answer to your question ... Peter
View ArticleClik here to view.
ESP8266-05 with external antenna
You look to have understood just fine it now looks fine. I find it useful to add a version number to the part file name to tell which version (if I have several) is the latest one. Peter
View ArticleClik here to view.
Schematic to breadboard layout
jovid196168: How do I go about putting this onto perfboard now? People have been suggesting for me to using an arduino mega but I herd you can make them on perfboard The perf board is potentially...
View ArticleCant get my parts to load properly after creating custom images
The fzpz would come from the part that you are trying to load the svgs in to, however I can tell you your problem from looking at the svg files you posted which is unfortunatly that you don't have any...
View Article