0.375in Pin Spacing on header?
Whoa. I didn't expect you just mod the part for me. Loaded it up and seems perfect. Thanks!
View ArticleClik here to view.
Fritzing too small for hires display (3200x1800)
I'm having a slightly different issue with Fritzing 0.9.3b on Xubuntu 16.04 on a 1080p screen. The components in the palette are a useable size but the program menu text and the bubble labels for...
View ArticleFritzing too small for hires display (3200x1800)
Update, under the font tab of the XFCE Settings-Appearance menu, I changed the DPI setting from 96 DPI to 144 DPI which made the menu and bubble label text a little larger so they are legible (all the...
View ArticleClik here to view.
0.375in Pin Spacing on header?
You are welcome. As steel_goose is fond of saying its easier to do it myself than explain how to do it. It was a 5 minute job with Inkscape to modify the svg and post it, the explaination of how to...
View ArticleClik here to view.
Need to import smoothiboard from github
While I'm not an expert, I don't think there is a quick fix. This isn't a Fritzing part, it is (as the title suggests) the png graphics of the board. While a Fritzing part could be made with the png...
View ArticleNeed to import smoothiboard from github
The svg for BB view is there, and maybe the PCB, so the SCH will have to me made and the .fzp.
View ArticleClik here to view.
Need to import smoothiboard from github
See there I go displaying my ignorance I just looked at the change log not the actual repository. However a look at the smoothieboard-fritzing.svg file indicates no connector pins yet, so a lot of...
View ArticleNeed to import smoothiboard from github
I don't understand Github either. I didn't check all the svgs but you could probably make the PCB by deleting stuff from the BB view, if it's dimensionally correct.
View ArticleNeed to import smoothiboard from github
If the OP wants to try and make a Fritzing part from whats there I'm willing to assist on things like creating an fpz file for it, just not the work of trying to figure out where all the connections...
View ArticleHow do I connect new wires?
While that will work for bb view, it will break schematic and pcb views. If all the OP wants is bb view for documentation that is a possible solution, however if he wants a correct schematic or pcb...
View ArticleNeed to import smoothiboard from github
Holly carp! Have you see the XML Edit of that thing.
View ArticleClik here to view.
Need to import smoothiboard from github
Yep, its complex. Someone that knew what they were doing made it and did a nice job.
View ArticleA new part creation HowTo (long! So long it is in 2 posts)
I just replaced the complete text of the first two posts in this thread that make up the howto with a corrected and expanded version. If you have read the original please read the update, as parts of...
View ArticleA new part creation HowTo (long! So long it is in 2 posts)
Thanks, Should those post be made into a sticky? I see a lot of threads asking about creating a part.
View ArticleClik here to view.
How do I connect new wires?
Needing to possibly use it in schematic and pcb at a later date is why I asked.I do make them the same colour and by appearance they look as if they are connected. I wondered if there was a way of...
View ArticleCustom shapes for the solder mask blocker
Heya, Has anyone found a workaround or trick to making this happen? I just need two empty circles to allow LEDs to shine through my boards from the underside. This would basically make my project...
View ArticleCustom shapes for the solder mask blocker
Won't a hole (from core parts bin pcb view) do what you need? This will put a hole with no pad through the board which I expect you would need to get the light through the fibreglass ...
View ArticleClik here to view.
Hologram Dash - Cellular MCU
As well as the fixes for your part, I managed to finish and post the updates to my part creation howto (which may tell you how I did some of the stuff) in A new part creation HowTo (long! So long it...
View Article